Exerpeutic Treadmill with Pulse Owner's Manual download pdf (Page 26)

WARNING: To prevent electrical shock, please turn off and unplug the

treadmill before cleaning or performing routine maintenance.

Remove everything on the table before adjusting the table to different angle.

Ensure the knob is secured before placing anything on the table.

CLEANING

The treadmill can be cleaned with a soft cloth and mild detergent. Do not use

abrasives or solvents. Be careful not get excessive moisture on the display

panel as this might cause an electrical hazard or electronics to fail.

Please keep the treadmill, especially, the console, out of direct sunlight to

prevent screen damage.

TROUBLESHOOTING GUIDE

MAINTENCE & TROUBLE SHOOTING

pply silicone lubricant.

2. Adjust the belt tension.

Adjust belt tension.

1. Put the power plug into the

electrical wall outlet.

2. Install the safety tether key.

3. Reset or have an electrician

replace the breaker in home.

4. Wait five minutes and then

press the switch back on.

Center the belt.

Problem

Treadmill will not

start.

Belt slips.

Belt is off centered.

Potential Causes

1. Not plugged in.

2. Safety tether key not

connected.

3. House circuit breaker

tripped.

4. Treadmill circuit breaker

tripped.

Belt not tight enough.

1. Not enough lubrication

applied onto the running

deck.

2. Belt is too tight.

Walking belt tension is not

even across the rear roller.

Corrections

Belt hesitates

When stepped

on.

1 2 ... 21 22 23 24 25 26 27 28 29 30

Comments to this Manuals

No comments

Exerpeutic Treadmill with Pulse Owner's Manual Page 26

Comments to this Manuals

Related products and manuals for Treadmills Exerpeutic Treadmill with Pulse